|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with HS chimney roof flashing to insure water tight installation.
|
Selkirk SURE-TEMP Locking Band, Stainless Steel, 8 in Dia, Suitable for: Chimney Pipe
|
Designed to fit on the round chimney pipe just above the roof flashing. The upper edge of the collar should be waterproofed with plastic sealer to prevent any water from leaking between the collar and chimney pipe. Part is tightened with screws or tabs after proper positioning.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to fit on the round chimney pipe just above the roof flashing. The upper edge of the collar should be waterproofed with plastic sealer to prevent any water from leaking between the collar and chimney pipe. Part is tightened with screws or tabs after proper positioning.
|
Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.
|
Included in ceiling support assembly, roof support assembly and tee assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diamond shaped 1/2 in x 1 in mesh, 18-8 stainless steel. Fits same size round chimney top. Keeps foreign objects out of chimney.
|
Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.
|
Prevents or delays the rapid spread of fire (regardless of the cause) in a home or building. The sheet metal firestop prevents the chimney passageway from becoming an easy pathway for fire to spread from one floor to another.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Included in ceiling support assembly, roof support assembly and tee assembly.
|
Used along the wall to provide for 2 in clearance and assure stability. Useful for suspending offsets. Required at 8 ft or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall.
|
Diamond shaped 1/2 in x 1 in mesh, 18-8 stainless steel. Fits same size round chimney top. Keeps foreign objects out of chimney.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bracket for supporting the chimney pipe offsets, securing outdoor chimney to exterior wall.
|
Used to trim the ceiling when a chimney is supported from above and extended down into room. Also used in conjunction with firestop/joist shield.
|
Used along the wall to provide for 2 in clearance and assure stability. Useful for suspending offsets. Required at 8 ft or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bracket for supporting the chimney pipe offsets, securing outdoor chimney to exterior wall.
|
Selkirk SURE-TEMP Locking Band, Stainless Steel, 6 in Dia, Suitable for: Chimney Pipe
|
Prevents or delays the rapid spread of fire (regardless of the cause) in a home or building. The sheet metal firestop prevents the chimney passageway from becoming an easy pathway for fire to spread from one floor to another.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides a finished appearance where the chimney passes through a sloped ceiling. Matte black finish. Adjusts to multiple roof pitches. Covers 4 in space around chimney pipe (or 2 in further than the required clearance).
|
Standard flashings fit various pitch roofs. Its double seamed construction protects from water leakage.
|
Used to trim the ceiling when a chimney is supported from above and extended down into room. Also used in conjunction with firestop/joist shield.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk Drip less Smoke Stove Pipe Adapter, 430 Stainless Steel, Dimensions: 15-3/4 In L
|
Provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads and speeding construction. Stainless steel and heavy-gauge steel construction for long life. Retains chimney with a twist-lock connection.
|
Interior resupport assembly allows for two different methods of chimney resupport. The first method is used at the immediate section of chimney above the upper elbow of an offset. With the appropriate fire stop/joist shield (JS) in place, clamp the support band around chimney and attach with six-sheet metal screws. The second means of support is used primarily when the immediate sections of the upper offset do not pass through a joist area and resupport is necessary. The support band is clamped around the chimney immediately below a locking band. In both methods, the straps are nailed to suitable framing at two inch clearance. The 18 ft limit of supportable chimney length applies.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with HS chimney roof flashing to insure water tight installation.
|
Selkirk Drip less Smoke Stove Pipe Adapter, 316 Stainless Steel, Dimensions: 15-3/4 In L
|
Selkirk Drip less Smoke Stove Pipe Adapter, 430 Stainless Steel, Dimensions: 15-3/4 In L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk SURE-TEMP Insulated Thimble, Wall Mounting
|
This new design gives you the flexibility of securing the 5, 6, 7 or 8 in Dia chimney with a heavy-duty band. The band allows you to slide the installed length verticaly to properly position this section in the system. Installation requirements are the same as our standard RSP. The URSA can hold 30 ft of pipe total only 20 ft.
|
Fits all roof pitches and requires only simple framing. Brackets and mounting hardware only.
|
|
|
